|
Model |
CNL-18 |
CNL-21 |
| No.
of control axis |
2
AXIS |
| Swing
over bed |
460mm(18.11") |
530mm(20.9") |
| Swing
over cross slide |
220mm(8.66") |
280mm(11") |
| Distance
between centers |
1000mm(40")
|
1500mm(60")
|
| Width
of bed |
350mm(10.236") |
|
Spindle nose |
18:D1-6, a1-6 / 21:D1-8,A1-8
Opt. high speed cartridge spindle :A2-6 |
| spindle
bore |
18:52mm,
21:80mm, Opt. high speed spindle:54mm |
| spindle
speeds |
18:150-2500rpm(4
step) 21:100-1600rpm (4 step)
Opt. high speed spindle : 4500 rpm |
|
Longitudinal travel (Z-axis) |
895mm(35.23") |
1415mm(55.70") |
| Cross
slide travel (X-axis) |
280mm(11.02") |
280mm(11.02") |
| AC
servo motor (X-axis) |
5.1NM.
|
| AC
servo motor (Z-axis) |
73NM |
| Dia.
of ball screw (X-axis) |
ø25mm PS C5 |
| Dia.
of ball screw (Z-axis) |
ø40mm
PS c5 |
| Rapid
traverse speed (X-axis) |
5m/min
(200ipm) |
| Rapid
traverse speed (Z-axis) |
10m/min
(400ipm) |
|
Tool ststion (Random) |
Std.
Manual 4 way tool post Opt. 4 way electrical turret |
Std.
Manual 4 way tool post, Opt. 4 way electrical
turret, Opt. 8 position hydraulic turret |
| Size
of external turning tool |
25mm |
25mm |
| Quill
diamter |
ø65mm |
| Quill
storke |
ø150mm |
| Taper
of center |
MT.
No.4 |
|
Main spindle motor |
18:10HP
/ 21:15HP Opt. high speed spindle:10HP or 15 HP |
|
Coolant pump |
1/8
HP |
| Hydraulic
tank |
40
L 1HP ( STD.8" hydraulic chuck) |
| Coolant
tank |
80
L |
| Weight
(Net/Gross) Approx. |
2250kg
/ 2500kg |
2750kg
/ 3000kg |
| Packing
sizes Length |
2540x1427x1957
mm
|
3040x1427x1957
mm |
Specification