 |
|
| |
|
CMT |
 |
|
|
|
CMT
7180 Power Nine CNC Heavy Duty Lathe
with 12" spindle bore |
The CMT class CNC heavy duty lathe is the heavy weight
champion of the CNC flat bed lathes. It will meet the
most demanding performance requirement of today's heavy
duty turning applications. It is equipped with the following
features:
Features
-
FANUC or Mitsubishi control system
-
Handheld MPG manual
position unit
- X
and Z axis are assembled with precision ball
screws and 60 degree
taper
precision bearings to achieve minimal backlash.
- Standard
spindle bore 153mm (6"). 9",
10", 12", 14", 16", 21"
spindle
bores optional.
-
8 position electrical disc turret (opt.)
-
4 position horizontal
horizontal turret (opt.)
-
Hydraulic/air chuck and cylinder or customize
face plates (opt.)
-
Double turret configuration
(opt.)
-
Automatic four step
variable speed changing will ensure
full torque output
even
at low spindle rpm
- Precision
spindle supported by 3 point Timken bearings
-
Integrated full splash guard housing to ensure
operator safety and
clean environment
-
Electrical cabinet is
equipped with heat exchanger, which protects
the
electronics
from industrial air/oil/water pollutants,
reduces cabinet temperature, and
safe guards the integrity of the electronic
components.
- Spindle
cooling system can reduce the temperature
of the spindle to minimize
the
thermal expansion (std.)
-
All gears are made of
Cr-M steel and are precision hardened and
ground to
ensure
low noise and long life.
-
Double chuck configuration (opt.)
-
Laser verified spindle
alignment, X, and Z position accuracy
-
C axis and power turret
|
Specification
|
Model
|
CMT-71
|
CMT-75
|
CMT-79
|
|
Swing over bed
|
1800mm(71")
|
1900mm(75")
|
2000mm(79")
|
|
Swing over cross slide
|
1300mm(51")
|
1400mm(55")
|
1500mm(59")
|
|
Distance between center
|
1000mm(40"),
1500mm(60"), 2000mm(80"), 3000mm(120"),
4000mm(160"), 5000mm(200")
|
|
Spindle bore
|
153mm(6")
/ OPT 230mm(9") 310mm(12") 355mm(14")
405mm(16") 530mm(21")
|
|
Spindle nose
|
ASA-A2-15
/ OPT A2-20
|
|
Spindle speed
|
4
|
|
Spindle range
|
1-400
RPM
|
|
Tailstock quill
|
Quill
= Ø 280mm(11") |
| Taper
of center
= MT NO.7 |
|
Bed width
|
1020mm(40")
|
|
Main motor
|
AC
30 KW (40HP))
|
|
Control
|
FANUC
MELDAS, SIEMENS
|
|
