 |
|
| |
|
CHL |
 |
|
|
|
CHL-32120
Hurricane CNC Heavy Duty Lathe
|
The CHL class CNC heavy duty lathe is highly
versatile for general turning applications. It is equipped
with the following features:
Features
-
FANUC or Mitsubishi control system
- Handheld
MPG manual position unit
- X
and Z axis are assembled with precision ball
screws and 60 degree
taper
precision bearings to achieve minimal backlash.
- Spindle
speed is controlled automatically by hydraulic
system
-
Two step variable speed changing will ensure
full torque output even at low
spindle
rpm
- Wide
selection of spindle bores: 80mm (3"),
105mm (4"), and 153mm (6").
- Precision
spindle supported by 3 point Timken bearings
-
8 position electrical disc turret (opt.)
-
4 position horizontal
horizontal turret (opt.)
-
Hydraulic/air chuck and cylinder (opt.)
- Double
turret configuration (opt.)
-
Integrated full splash guard housing to ensure
operator safety and clean environment
-
Electrical cabinet is
equipped with heat exchanger, which protects
the
electronics
from industrial air/oil/water pollutants,
reduces cabinet temperature, and
safe guards the integrity of the electronic
components.
-
Spindle cooling system can reduce the temperature
of the spindle to
minimize
the thermal expansion (opt.)
-
All gears are made of
Cr-M steel and are precision hardened and
ground to
ensure
low noise and long life.
- Double
chuck configuration (opt.)
-
Laser verified spindle
alignment, X, and Z position accuracy
-
C axis and power turret
|
Specification
|
Model
|
CHL-22
|
CHL-26
|
CHL-28
|
CHL-32
|
|
Swing over bed
|
560mm(22")
|
660mm(26")
|
730mm(28")
|
830mm(32")
|
|
Swing over cross slide
|
300mm(12")
|
400mm(16")
|
450mm(17.7")
|
550mm(21.6")
|
|
Distance between center
|
1000mm(40"),
1500mm(60"), 2000mm(80"), 3000mm(120"),
4000mm(160"), 5000mm(200")
|
|
Spindle bore
|
80mm(3")
|
105mm(4")
/ OPT 153mm(6")
|
|
Spindle nose
|
ASA-A2-8
/ OPT A2-11
|
|
Spindle speed
|
2
|
|
Spindle range
|
3-1075
|
3-1560
|
|
Tailstock quill
|
MT
No.5
|
|
Bed width
|
380mm(15")
|
460mm(18")
|
|
Main motor
|
AC
7.5KW(10HP)
|
AC
11KW(15HP)
|
|
Control
|
FANUC
OT-C / or MITSUBISHI, SIEMENS
|
|
