 |
|
| ML-17/20 |
 |
 |
|
|
Precision
High Speed Lathe with 80mm
spindle bore |
ML-17/20
is equipped with one of the biggest spindle bore 80mm
in its class (D1-6 spindle). Its extra capacity spindle
bore allows the operator to turn large diameter bars
through spindle hole, saving extensive money and time.
ML's carriage and cross slide have wide contact bearing
areas to provide stability for heavy cutting and near-polishing
quality finishing cut. Wide range of speed selection
to allow operator to find the optimum cutting conditions.
Test drive one of ML lathe at you nearest dealer to
believe its performance.
Features
-
Longitudinal and cross slide automatic feed
-
Frictional clutch for operator safety and
collision prevention
- Sheer
pins on lead screw to protect gear breakage
- Norton
gear box to machine metric, inch, DP, &
MP threads (No
changing gears necessary!)
- Bed
width 305mm (12")
- 12
spindle speed selection
- Standard
7.5HP motor
- Spindle
hardened and ground
-
Precision spindle supported on triple point
bearings configuration
-
Solid one piece base
to provide maximum rigidity and minimal
vibration
- Coolant
pump and coolant tank
-
Heavy duty Nylon end gears to minimize headstock
noise and to prevent gear
breakage from collisions
|
Specification
|
Model |
ML-1740 |
ML-1760 |
ML-2040 |
ML-2060 |
|
Swing over bed |
435mm (17") |
508mm (20") |
|
Swing over cross slide |
277mm (10-7/8") |
353mm (14") |
|
Distance between center |
1120mm (44") |
1450mm (57") |
1120mm (44") |
1450mm (57") |
|
Spindle bore |
D1 - 6 |
|
Spindle nose |
MT - 6 |
|
Spindle speed |
12 steps |
|
Spindle range |
36 - 1800 rpm |
|
Tailstock quill |
MT. 4 |
|
Main motor |
7.5HP |
|
Gross weight |
2050kg |
2400kg |
2100kg |
2450kg |
|
